Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Start a print ====== - Load in a 3D file - Set the slicer profiles - Click the big ''Process'' button & select ''Slice with Slic3r''. - When the G-code preview looks good, click ''Print'' - Use ''Z fine adjust'' (''Z+'' = bed closer to nozzle, ''Z-'' = bed further away from nozzle) - Use ''Kill Job'' when you want to stop the test. hyrel/start_a_print.txt Last modified: 2020/10/06 04:27by formlab