Tips

Cylinders can be combined for larger volume prints.
- M0 x0 y200 (Pauses the print and brings the tool head forward so the current cylinder can be swapped out for a new one. When ready, press continue).
Keep cylinders CLEAN. Dry material inside is the #1 problem.
No air in cylinders. Air will make the material delivery spongy. Accurate control is impossible this way.
manuals are at Desktop > repetrel > Manuals. Check the Accessories folder for manuals about the toolheads.
Choosing another Slicer Profile
- Make sure you select first the project file (Main) and then the 3D object in the project window before choosing a new slicing profile. This is a quirk of the Repetrel software. Make sure to Add consistent notes to the slicer profiles, so you can notice them in the G-code preview (they are printed on top of the file). This makes it easier to see exactly which profile you selected

Dialing in new material settings

Apart from the slicer profile, the tool-head controls the flow of material
- Prime: whenever transitioning from a non-printing move to a printing move.
- Unprime: whenever transitioning from a printing move to a non-printing move.
- Adjust these settings by halving or doubling the steps and rate, making a test print and then reassessing.
- More info: https://madprinter.org/2016/07/05/dialing-in-material-settings/