Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Prepare for 3D printing ====== * watertight * not too many intersections * avoid small details (0.8mm minimum detail, but tall objects should be thinker) * if part snaps together with other part: allow clearance * if part snaps together with other part: make sure the part can be inserted prepare_for_3d_printing/prepare_for_3d_printing.txt Last modified: 2022/08/22 02:54by formlab