Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Projet MJP 3600 ====== {{:projet_mjp_3600:pj3600_angle01-940_tn_web.png?nolink&200|}} Multijetting 3D printer * Max Build Volume: ''298 x 183 x 203mm'' ---- === How much does it cost? === ( build material cost + support material cost ) * material multiplier ) + ( machine time (in hours) * machine time cost ) * Build material cost: €515,70 per 2Kg * Support material cost: €279,72 per 2Kg * Material multiplier: 10% (build and support material * 1,1) * Machine time cost: €0,55 per hour === Design constraints === * A hollow model needs a hole for the support material to drain out. Without a hole, the software will fill the space with building material === Post production === * Degrease object with IPA to increase adhesion for paint * Use a primer for UV protection * Spray paint * Colouring the volume of the object: immerse into a mixture of acetone (30%), water (70%) and fabric paint (experimental) projet_mjp_3600/projet_mjp_3600.txt Last modified: 2021/01/26 01:46by formlab