Differences

This shows you the differences between two versions of the page.

--- autodesk_ember:autodesk_ember [2024/12/06 03:11] – [Error loading file] formlab
+++ autodesk_ember:autodesk_ember [2025/01/15 00:52] (current) – [Troubleshooting] formlab
@@ Line 310: / Line 310: @@
 In the ''3D-Print'' add-on, click the button ''Volume'' under Statistics. The volume is reported in cm3. Multiply with 1000 to get mm3.
-==== How much does it cost? ====
-<code>
-( resin amount (in liter) * resin cost * material multiplier )
-  +
-( machine time (in hours) * machine time multiplier )
-</code>
-  * resin amount: calculate the volume of your model in a 3D application. Then calculate this amount in liters:
-  * Volume of 3D model (mm3) * ( 10 to the power of -6 )
-  * resin cost: €108,00 per liter
-  * material multiplier: 30%: material cost *1,3
-  * machine time multiplier: €0,55 per hour
 ==== Resin design guidelines ====
@@ Line 345: / Line 332: @@
 ==== Troubleshooting ====
+- [[https://ameralabs.com/blog/resin-3d-printing-troubleshooting-a-comprehensive-guide/|Resin 3D printing troubleshooting guide]]
 === Error loading file ===
 After a long time without use, the printer gave the message 'Error loading file' on the LCD screen when trying to start a new print. In the logs we found errors saying that it couldn't copy a file from the 'staging' directory to the print data directory because a  file or folder could't be found. We tried out a few different things but the probable fix for it is to clear out the data from the previous print. The brain of the Ember is a Beaglebone Black, the 3D print engine is calles Smith.
@@ Line 371: / Line 360: @@
 If this doesn't work, have a look at [[https://www.topbug.net/blog/2013/04/14/install-and-use-gnu-command-line-tools-in-mac-os-x/|this article]]. We were suggested to install the GNU command line tools. Not sure if they're useful or not.
+=== Tray jamming ===
+Resin tray moves back and forth rapidly on the separation slide motion. We lowered the separation slide velocity and played with some other settings but no luck. We increased the motor current for both motors but no luck with that also.
+Still trying to sold this issue.