Tips
- Cylinders can be combined for larger volume prints.
- M0 x0 y200 (Pauses the print and brings the tool head forward so the current cylinder can be swapped out for a new one. When ready, press continue).
- Keep cylinders CLEAN. Dry material inside is the #1 problem.
- No air in cylinders. Air will make the material delivery spongy. Accurate control is impossible this way.
- manuals are at
Desktop > repetrel > Manuals. Check theAccessoriesfolder for manuals about the toolheads. - Choosing another Slicer Profile
- Make sure you select first the project file (Main) and then the 3D object in the project window before choosing a new slicing profile. This is a quirk of the Repetrel software. Make sure to Add consistent notes to the slicer profiles, so you can notice them in the G-code preview (they are printed on top of the file). This makes it easier to see exactly which profile you selected
Dialing in new material settings
- Apart from the slicer profile, the tool-head controls the flow of material
Prime: whenever transitioning from a non-printing move to a printing move.Unprime: whenever transitioning from a printing move to a non-printing move.- Adjust these settings by halving or doubling the steps and rate, making a test print and then reassessing.